The advantages of these decking screws are:
Applications: Commonly used for both soft and hardwood wide board decking up to 65mm thick.
Tips for use: Use Quick Cut for counter sinking/ drilling pilot hole. 5mm Max Torsion tip to drive screw.
Pre-drilling may be required and recommended for hardwood and board ends.
Build your deck faster with Bugle Decking Screw 304, Square Drive, T17 Tip .
Applications
Tips for use:
Note: Screw length depends on the thickness and type of the material you’re working with. Consult a Licensed Building Practitioner (LBP) to determine the best screw length for your application.
NB: These guidelines should be read in conjunction with the New Zealand Building Code (NZS3602, NZS3604, NZS3605, NZS3640 and NZS4203).
Note: Stainless steel fasteners embedded in some high tannin timbers such as Garapa may cause localised tannin stains on the surface of the timber. This risk is reduced by using 316 stainless steel screws (and not 304 stainless steel) and using un-coloured screws (not bronze or black stainless steel options).
Bronze finish is a 'vintage' look and may wear off when installed in high traffic areas, cleaned with abrasive methods or damaged during installation.
The advantages of these decking screws are:
Applications: Commonly used for both soft and hardwood wide board decking up to 65mm thick.
Tips for use: Use Quick Cut for counter sinking/ drilling pilot hole. 5mm Max Torsion tip to drive screw.
Pre-drilling may be required and recommended for hardwood and board ends.
Build your deck faster with Bugle Decking Screw 304, Square Drive, T17 Tip .
Applications
Tips for use:
Note: Screw length depends on the thickness and type of the material you’re working with. Consult a Licensed Building Practitioner (LBP) to determine the best screw length for your application.
NB: These guidelines should be read in conjunction with the New Zealand Building Code (NZS3602, NZS3604, NZS3605, NZS3640 and NZS4203).
Note: Stainless steel fasteners embedded in some high tannin timbers such as Garapa may cause localised tannin stains on the surface of the timber. This risk is reduced by using 316 stainless steel screws (and not 304 stainless steel) and using un-coloured screws (not bronze or black stainless steel options).
Bronze finish is a 'vintage' look and may wear off when installed in high traffic areas, cleaned with abrasive methods or damaged during installation.
Free Beanie With Every order Over $500 of AM Ruspert Concrete Screws
Lindapter Girder Clamps: Safe and Secure Connections
Build without delays with Anzor Quick Drill Screws for timber construction.
To receive useful info and product updates add your details below
Request a copy of our Engineering & Marine, or Construction Wall Chart.
Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.
Click here to download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.
