• Fischer FH II Sleeve Anchors have ETA (European technical assessment) that meets the NZBC requirements (NZS 3101 concrete structures standard)
• Approved for seismic applications of performance category C1 & C2 and classification as per fire resistance class R 120 guarantee added safety.
• Approved for use in cracked concrete
• Meets BPIR regulation
• The low profile of the screw head ensures for a discreet fixing.
• The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
• The optimised geometry intelligently reduces the energy required for assembly.
• The approval regulates the use of hollow drills.

Applications

• Guard rails
• Staircases
• Consoles
• Steel constructions
• Ladders
• Cable trays
• Machines
• Gates
• Façades
• Gratings

Building Materials

Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

You can find detailed information on building materials in the approval document.

Approvals

• ETA-07/0025
• DoP No. 0197
• 3023222
• ESR-2691

Functionality

• The FH II is suitable for push-through installation.
• When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
• The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base.
• Available head shapes for flexible design solutions:
  Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H).
• Visit fischer for Technical Data and Assembly Instructions.

European Technical Assessment (ETA)

Load Table

Technical Documents

ICC Certification