• fischer Nail Anchors have ETA (European technical assessment) that meets the NZBC requirements (NZS 3101 concrete structures standard)
• Approved for concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
• Meets BPIR regulation
• The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
• The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
• The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
• The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
• A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.

Applications

• Fire protection plates
• Fire protection boards
• Ventilation systems
• Wire and nonious hangers
• Mounting rails
• Metal clamps
• Substructures made of wood and metal

Building Materials

Approved for:

• Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications

Also suitable for:

• Solid sand-lime brick
• Natural stone with dense structure
• Prestressed hollow-core concrete slabs

You can find detailed information on building materials in the registration document.

Approvals

• ETA-06/0175
• DoP No. 0235
• GS 6.1/21-076-1

Functionality

• The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and pushthrough installation. The FNA II OE and H
  are suitable for pre-positioned installation.
• The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
• Available setting tools:
  FNA S-SBO to slip onto the drill,
  FNA S-SDS for series installation with a drilling hammer,
  FNA S-H for the manual installation of mounting rails.
• Visit fischer for Technical Data and Assembly Instructions.

European Technical Assessment (ETA)

Declaration of Performance

Load Table

Test Report