Stainless Bugle Batten Screw Skt Drive

The advantages of these decking screws are:

Flush finish.
Heavy duty screw with an industrial look.
High pull out loads.
Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications: Commonly used for both soft and hardwood wide board decking up to 65mm thick.

Tips for use:

Use Quick Cut for counter sinking/drilling pilot hole.
5mm Max Torsion tip to drive screw.
Pre-drilling may be required and recommended for hardwood and board ends.

Select Material

316

Galv Bugle Batten Screws

Build your deck faster with Bugle Batten Screw 316, Socket Drive, T17 Tip .

Advantages

Meets BPIR regulation
316 stainless
Flush finish.
Heavy duty screw with an industrial look.
High pull out loads.
Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications and Approval

Applications

Commonly used for both soft and hardwood wide board decking up to 65mm thick.

Tips for use:

Use Quick Cut for counter sinking/drilling pilot hole.
5mm Max Torsion tip to drive screw.
Pre-drilling may be required and recommended for hardwood and board ends.

Note: Screw length depends on the thickness and type of the material you’re working with. Consult a Licensed Building Practitioner (LBP) to determine the best screw length for your application.

NB: These guidelines should be read in conjunction with the New Zealand Building Code (NZS3602, NZS3604, NZS3605, NZS3640 and NZS4203).

Downloads

Stainless Steel Decking Screws

Stainless Bugle Batten Screw Skt Drive

The advantages of these decking screws are:

Flush finish.
Heavy duty screw with an industrial look.
High pull out loads.
Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications: Commonly used for both soft and hardwood wide board decking up to 65mm thick.

Tips for use:

Use Quick Cut for counter sinking/drilling pilot hole.
5mm Max Torsion tip to drive screw.
Pre-drilling may be required and recommended for hardwood and board ends.

Bugle Batten Screw 316, Socket Drive, T17 Tip

316 Stainless

Stainless Bugle Batten Screw with T17 Cutter

316 Stainless

Galv Bugle Batten Screws

Galv Bugle Batten Screws

Build your deck faster with Bugle Batten Screw 316, Socket Drive, T17 Tip .

Advantages

Meets BPIR regulation
316 stainless
Flush finish.
Heavy duty screw with an industrial look.
High pull out loads.
Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications and Approval

Applications

Commonly used for both soft and hardwood wide board decking up to 65mm thick.

Tips for use:

Use Quick Cut for counter sinking/drilling pilot hole.
5mm Max Torsion tip to drive screw.
Pre-drilling may be required and recommended for hardwood and board ends.

Note: Screw length depends on the thickness and type of the material you’re working with. Consult a Licensed Building Practitioner (LBP) to determine the best screw length for your application.

NB: These guidelines should be read in conjunction with the New Zealand Building Code (NZS3602, NZS3604, NZS3605, NZS3640 and NZS4203).

Downloads

Stainless Steel Decking Screws