M10 X 80 Galv Screw Bolt Strong Tie

M10 X 80 Galv Screw Bolt Strong Tie

M10 X 80 Galv Screw Bolt Strong Tie
DYBSG10080ST
Out of Stock
Your cart has been updated.

M10 X 80 Galv Screw Bolt Strong Tie

DYBSG10080ST
Hot Dip Galvanized Concrete Screw Bolt
Your cart has been updated.

Galv Screw Bolt Strong Tie is a high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. It has innovative serrated carbon-steel threads on the tip which are vital because they undercut the concrete as the anchor is driven into the hole, making way for the rest of the threads to interlock with the concrete.

Advantages
  • Suitable for push through applications
  • Specialised Heat-Treatment Process creates tip hardness to facilitate cutting while the anchor body remains ductile.
  • With high ductility it can be bent to a right angle (90 degrees) and remain intact without snapping or breakage.
  • Hex-Washer Head increases bearing surface and requires no separate washer, unless required by specification and provides a clean installed appearance.
  • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits.
  • Testing shows the installs in concrete with 50% less torque than competitor anchors
  • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved.
  • Vibration and Shock Resistance
  • Excellent minimum edge distance performance
  • Qualified for static and seismic loading conditions
  • Available in a wide range of diameters and lengths
Applications and Approval

Applications

  • Electrical Boxes
  • Light Fixtures
  • Window Frames
  • Timber Strapping
  • Pipe and cable clips

Approval

  • Complies with AS5216
  • ETA-12/0060 (Option 1)
  • Code listed under IBC/IRC in accordance with ICC-ES AC193 and ACI 355.2 for cracked and uncracked concrete per ICC-ES ESR-2713
  • Code listed under IBC/IRC in accordance with ICCES AC106 for masonry per ICC-ES ESR-1056
  • BRANZ Appraisal 983 (2018) for applications related to bottom plate fixings and holdown applications per NZS 3604
Downloads

M10 X 80 Galv Screw Bolt Strong Tie

M10 X 80 Galv Screw Bolt Strong Tie

M10 X 80 Galv Screw Bolt Strong Tie
DYBSG10080ST
Out of Stock
Your cart has been updated.

M10 X 80 Galv Screw Bolt Strong Tie

DYBSG10080ST
Hot Dip Galvanized Concrete Screw Bolt
Your cart has been updated.

Galv Screw Bolt Strong Tie is a high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. It has innovative serrated carbon-steel threads on the tip which are vital because they undercut the concrete as the anchor is driven into the hole, making way for the rest of the threads to interlock with the concrete.

Advantages
  • Suitable for push through applications
  • Specialised Heat-Treatment Process creates tip hardness to facilitate cutting while the anchor body remains ductile.
  • With high ductility it can be bent to a right angle (90 degrees) and remain intact without snapping or breakage.
  • Hex-Washer Head increases bearing surface and requires no separate washer, unless required by specification and provides a clean installed appearance.
  • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits.
  • Testing shows the installs in concrete with 50% less torque than competitor anchors
  • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved.
  • Vibration and Shock Resistance
  • Excellent minimum edge distance performance
  • Qualified for static and seismic loading conditions
  • Available in a wide range of diameters and lengths
Applications and Approval

Applications

  • Electrical Boxes
  • Light Fixtures
  • Window Frames
  • Timber Strapping
  • Pipe and cable clips

Approval

  • Complies with AS5216
  • ETA-12/0060 (Option 1)
  • Code listed under IBC/IRC in accordance with ICC-ES AC193 and ACI 355.2 for cracked and uncracked concrete per ICC-ES ESR-2713
  • Code listed under IBC/IRC in accordance with ICCES AC106 for masonry per ICC-ES ESR-1056
  • BRANZ Appraisal 983 (2018) for applications related to bottom plate fixings and holdown applications per NZS 3604
Downloads

Learn Something New

To receive useful info and product updates add your details below

You are subscribed to push notifications but they are not enabled in your browser.
Please either enable push notifications here or unsubscribe here.