The Anzor Pressfit System meets AS/NZS 3688:2016 standards, designed for fast and easy installation, and manufactured from 316L stainless steel to deliver outstanding corrosion resistance.
Each fitting is laser-engraved for clear identification - displaying the brand, size, material and batch number for full traceability.
The Anzor Pressfit System meets AS/NZS 3688:2016 standards, designed for fast and easy installation, and manufactured from 316L stainless steel to deliver outstanding corrosion resistance.
Each fitting is laser-engraved for clear identification - displaying the brand, size, material and batch number for full traceability.
What is Pressfit? Pressfit fittings join pipes without soldering, threading, or welding—using a pressing tool to create fast, clean, and leak-resistant connections.
All fittings are WaterMark approved — with the exception of tube & tube clamps, which are currently in progress.
Anzor Pressfit Fittings - Certified by Bureau Veritas Marine & Offshore International Register
All fittings are Bureau Veritas certified — with the exception of tube and tube clamps.
Residential Plumbing: Ideal for potable water lines, ensuring quick and secure connections
without the need for soldering
Commercial Buildings: Used in plumbing and HVAC systems where speed and safety are crucial
Industrial Applications: Suitable for gas distribution, compressed air systems, and chemical lines
Hydronic Heating and Cooling Systems: Efficiently used in systems that require quick
installation and minimal downtime
Greywater and Rainwater Systems: Effective for non-potable water systems
Fuel, Oil, and Lubricant Lines: Provides secure connections for various fluid transport systems
Press Tools & Accessories
Novopress pressing devices and accessories are suitable for a wide range of applications and offer a secure solution in the area of pipe connecting technology.
How to Use Pressfit Tools
Use the guide below to check media compatibility across 316L stainless steel and common sealing materials. For application-specific entries, always consider the stated diameter, pressure and operating conditions.
| Media / Fluid | Diameter (mm) |
Max Work Pressure (bar) |
316L | EPDM | HNBR | FKM / FPM | Notes / Conditions |
|---|---|---|---|---|---|---|---|
| Acetic acid 20% | — | — | |||||
| Acetone 100% | — | — | |||||
| Acetylene | <22 | 1.5 | — | AS4289 (15-35mm) | |||
| 28 | 1.3 | ||||||
| 35 | 1.0 | ||||||
| Ad Blue/Urea | 15-54 | 25 | — | — | |||
| 76-168 | 16 | ||||||
| Ammonia | 15-108 | 16 | — | Dry; max purity N3.8 | |||
| Ammonia dry | — | — | |||||
| Ammonium chloride 1% | — | — | |||||
| Ammonium nitrate 10+50% | — | — | |||||
| Ammonium phosphate 10% | — | — | |||||
| Ammonium sulfate 10% | — | — | |||||
| Aniline | — | — | |||||
| Aqua regia, aqua fortis | — | — | |||||
| Argon | 15-108 | 16 | — | Max purity N40 | |||
| Avgas | 15-54 | 25 | — | — | |||
| 76-168 | 16 | ||||||
| Battery acid | — | — | |||||
| Benzene | — | — | |||||
| Bio-Diesel (dry) (B100) | 15-54 | 25 | — | No water or wetting agents | |||
| 76-168 | 16 | ||||||
| Bio-Ethanol | 15-54 | 25 | — | E85 (85% Ethanol) | |||
| 76-168 | 16 | ||||||
| Bio-Gas | 15-168 | 16 | — | Methane, CO₂, nitrogen & hydrogen sulphide | |||
| Boric acid 5% | — | — | |||||
| Butane | 15-108 | 5 | — | — | |||
| Butanol | — | — | |||||
| Calcium Hydroxide ≤ 10°C | — | — | |||||
| Calcium Hypochlorite | — | — | |||||
| Carbon dioxide | 15-108 | 16 | — | Dry; max purity N2.5 | |||
| Carbon monoxide | 15-108 | 16 | — | Dry; max purity N3.7 | |||
| Caustic soda ≤ 50% | — | — | |||||
| Chlorine (dry) | — | — | |||||
| Citric acid 5% | — | — | |||||
| Compressed Air | 15-54 | 25 | — | If dry system | If wet system | If wet system | Dry <1.0 mg/m³ / wet (oil) lubricated air |
| 76-108 | 16 | ||||||
| Compressed air \* | — | — | |||||
| Copper chloride | — | — | |||||
| Copper nitrate | — | — | |||||
| Copper sulfate 10% | — | — | |||||
| Demineralised & RO Waters | 15-108 | 25 | — | — | — | Conductivity >0.1 µS/cm (EC), pH 4-14 | |
| 168 | 16 | ||||||
| Diesel | 15-54 | 25 | — | Flashpoint 50-80°C | |||
| 76-168 | 16 | ||||||
| Engine oil | — | — | |||||
| Ethane | 15-168 | 5 | — | — | |||
| Ethanol | 15-54 | 25 | — | Temp <+25°C | |||
| 76-168 | 16 | ||||||
| Ethylene glycol | — | — | |||||
| Ethylene Oxide | — | — | |||||
| Ferric chloride, watery | — | — | |||||
| Ferric sulfate | — | — | |||||
| Fire Services | 15-168 | 25 (refer ActivFire) | — | — | — | Sprinkler & hydrant | |
| Formaldehyde | — | — | |||||
| Formic acid | — | — | |||||
| Gas oil | — | — | |||||
| Gasoline | — | — | |||||
| Gear oil | — | — | |||||
| Glycol (<90% by vol) | 15-108 | 25 | — | EPDM for ethylene & propylene bases | |||
| 168 | 16 | ||||||
| Helium | 15-108 | 16 | — | Max purity N4.0 | |||
| Hexane | — | — | |||||
| Hydrochloric acid 100% | — | — | |||||
| Hydrogen | 15-108 | 16 | — | Max purity N4.0; may leak <0.001 cm³/min | |||
| Hydrogen fluoride | — | — | |||||
| Hydrogen peroxide 10% | — | — | |||||
| Kerosene | 15-54 | 25 | — | — | |||
| 76-168 | 16 | ||||||
| Linseed oil | — | — | |||||
| LPG (Propane) | 15-168 | 2(5) | — | AS 3688 approved; fitting marked "GAS" | |||
| Lubricants | — | — | — | — | — | ||
| Lubricating oils | — | — | |||||
| Machine oil | — | — | |||||
| Magnesium chloride ≤20% | — | — | |||||
| Magnesium hydroxide 100°C | — | — | |||||
| Magnesium sulfate <40% | — | — | |||||
| Methane | 15-108 | 5 | — | — | |||
| Methanol | 15-168 | 16 | — | — | |||
| Mineral oil | — | — | |||||
| Motor (Mineral) Oil, SAE | 15-54 | 25 | — | — | Not including E10 fuel with ethanol additives | ||
| 76-168 | 16 | ||||||
| Naphtha | — | — | |||||
| Naphthalene | — | — | |||||
| Nickel chloride 10÷30% | — | — | |||||
| Nickel sulfate | — | — | |||||
| Nitric acid ≤20% | — | — | |||||
| Paraffin | — | — | |||||
| Phosphoric acid | — | — | |||||
| Photo developer/fixing bath | — | — | |||||
| Potassium chloride | — | — | |||||
| Potassium hydroxide ≤ 50°C | — | — | |||||
| Potassium sulfate 10% | — | — | |||||
| Propane (liquefied) | — | — | |||||
| Propylene glycol (<90% by vol) | 15-108 | 25 | EPDM for ethylene & propylene bases | ||||
| 168 | 16 | ||||||
| Prussic acid | — | — | |||||
| Sea water | — | — | |||||
| Sodium bicarbonate | — | — | |||||
| Sodium chloride 5% | — | — | |||||
| Sodium nitrate ≤ 40% | — | — | |||||
| Sodium phosphate | — | — | |||||
| Sodium sulfate 10% | — | — | |||||
| Sulfuric acid 10% 60°C | — | — | |||||
| Sulfuric acid 100%, moist | — | — | |||||
| Sulfuric acid, smoking | — | — | |||||
| Sulphur dioxide (dry) | — | — | |||||
| Tannin | — | — | |||||
| Tanning agents for leather | — | — | |||||
| Tartaric Acid 10% 100°C | — | — | |||||
| Toluol 20°C | — | — | |||||
| Trichloroethylene | — | — | |||||
| Turpentine | — | — | |||||
| Water ≤ 100°C | — | — | |||||
| Water, deionised | — | — | |||||
| Water, distilled | — | — | |||||
| Zinc chloride | — | — | |||||
| Zinc sulfate 10% | — | — |
Guide only: Suitability can vary with concentration, temperature, pressure and operating conditions. Where an application-specific rating is provided, use those stated conditions rather than the general compatibility rating.
Press Fit Tools are available for hire exclusively to customers with an Anzor Credit Account.
The Anzor Pressfit System meets AS/NZS 3688:2016 standards, designed for fast and easy installation, and manufactured from 316L stainless steel to deliver outstanding corrosion resistance.
Each fitting is laser-engraved for clear identification - displaying the brand, size, material and batch number for full traceability.
The Anzor Pressfit System meets AS/NZS 3688:2016 standards, designed for fast and easy installation, and manufactured from 316L stainless steel to deliver outstanding corrosion resistance.
Each fitting is laser-engraved for clear identification - displaying the brand, size, material and batch number for full traceability.
What is Pressfit? Pressfit fittings join pipes without soldering, threading, or welding—using a pressing tool to create fast, clean, and leak-resistant connections.
All fittings are WaterMark approved — with the exception of tube & tube clamps, which are currently in progress.
Anzor Pressfit Fittings - Certified by Bureau Veritas Marine & Offshore International Register
All fittings are Bureau Veritas certified — with the exception of tube and tube clamps.
Residential Plumbing: Ideal for potable water lines, ensuring quick and secure connections
without the need for soldering
Commercial Buildings: Used in plumbing and HVAC systems where speed and safety are crucial
Industrial Applications: Suitable for gas distribution, compressed air systems, and chemical lines
Hydronic Heating and Cooling Systems: Efficiently used in systems that require quick
installation and minimal downtime
Greywater and Rainwater Systems: Effective for non-potable water systems
Fuel, Oil, and Lubricant Lines: Provides secure connections for various fluid transport systems
Press Tools & Accessories
Novopress pressing devices and accessories are suitable for a wide range of applications and offer a secure solution in the area of pipe connecting technology.
How to Use Pressfit Tools
Use the guide below to check media compatibility across 316L stainless steel and common sealing materials. For application-specific entries, always consider the stated diameter, pressure and operating conditions.
| Media / Fluid | Diameter (mm) |
Max Work Pressure (bar) |
316L | EPDM | HNBR | FKM / FPM | Notes / Conditions |
|---|---|---|---|---|---|---|---|
| Acetic acid 20% | — | — | |||||
| Acetone 100% | — | — | |||||
| Acetylene | <22 | 1.5 | — | AS4289 (15-35mm) | |||
| 28 | 1.3 | ||||||
| 35 | 1.0 | ||||||
| Ad Blue/Urea | 15-54 | 25 | — | — | |||
| 76-168 | 16 | ||||||
| Ammonia | 15-108 | 16 | — | Dry; max purity N3.8 | |||
| Ammonia dry | — | — | |||||
| Ammonium chloride 1% | — | — | |||||
| Ammonium nitrate 10+50% | — | — | |||||
| Ammonium phosphate 10% | — | — | |||||
| Ammonium sulfate 10% | — | — | |||||
| Aniline | — | — | |||||
| Aqua regia, aqua fortis | — | — | |||||
| Argon | 15-108 | 16 | — | Max purity N40 | |||
| Avgas | 15-54 | 25 | — | — | |||
| 76-168 | 16 | ||||||
| Battery acid | — | — | |||||
| Benzene | — | — | |||||
| Bio-Diesel (dry) (B100) | 15-54 | 25 | — | No water or wetting agents | |||
| 76-168 | 16 | ||||||
| Bio-Ethanol | 15-54 | 25 | — | E85 (85% Ethanol) | |||
| 76-168 | 16 | ||||||
| Bio-Gas | 15-168 | 16 | — | Methane, CO₂, nitrogen & hydrogen sulphide | |||
| Boric acid 5% | — | — | |||||
| Butane | 15-108 | 5 | — | — | |||
| Butanol | — | — | |||||
| Calcium Hydroxide ≤ 10°C | — | — | |||||
| Calcium Hypochlorite | — | — | |||||
| Carbon dioxide | 15-108 | 16 | — | Dry; max purity N2.5 | |||
| Carbon monoxide | 15-108 | 16 | — | Dry; max purity N3.7 | |||
| Caustic soda ≤ 50% | — | — | |||||
| Chlorine (dry) | — | — | |||||
| Citric acid 5% | — | — | |||||
| Compressed Air | 15-54 | 25 | — | If dry system | If wet system | If wet system | Dry <1.0 mg/m³ / wet (oil) lubricated air |
| 76-108 | 16 | ||||||
| Compressed air \* | — | — | |||||
| Copper chloride | — | — | |||||
| Copper nitrate | — | — | |||||
| Copper sulfate 10% | — | — | |||||
| Demineralised & RO Waters | 15-108 | 25 | — | — | — | Conductivity >0.1 µS/cm (EC), pH 4-14 | |
| 168 | 16 | ||||||
| Diesel | 15-54 | 25 | — | Flashpoint 50-80°C | |||
| 76-168 | 16 | ||||||
| Engine oil | — | — | |||||
| Ethane | 15-168 | 5 | — | — | |||
| Ethanol | 15-54 | 25 | — | Temp <+25°C | |||
| 76-168 | 16 | ||||||
| Ethylene glycol | — | — | |||||
| Ethylene Oxide | — | — | |||||
| Ferric chloride, watery | — | — | |||||
| Ferric sulfate | — | — | |||||
| Fire Services | 15-168 | 25 (refer ActivFire) | — | — | — | Sprinkler & hydrant | |
| Formaldehyde | — | — | |||||
| Formic acid | — | — | |||||
| Gas oil | — | — | |||||
| Gasoline | — | — | |||||
| Gear oil | — | — | |||||
| Glycol (<90% by vol) | 15-108 | 25 | — | EPDM for ethylene & propylene bases | |||
| 168 | 16 | ||||||
| Helium | 15-108 | 16 | — | Max purity N4.0 | |||
| Hexane | — | — | |||||
| Hydrochloric acid 100% | — | — | |||||
| Hydrogen | 15-108 | 16 | — | Max purity N4.0; may leak <0.001 cm³/min | |||
| Hydrogen fluoride | — | — | |||||
| Hydrogen peroxide 10% | — | — | |||||
| Kerosene | 15-54 | 25 | — | — | |||
| 76-168 | 16 | ||||||
| Linseed oil | — | — | |||||
| LPG (Propane) | 15-168 | 2(5) | — | AS 3688 approved; fitting marked "GAS" | |||
| Lubricants | — | — | — | — | — | ||
| Lubricating oils | — | — | |||||
| Machine oil | — | — | |||||
| Magnesium chloride ≤20% | — | — | |||||
| Magnesium hydroxide 100°C | — | — | |||||
| Magnesium sulfate <40% | — | — | |||||
| Methane | 15-108 | 5 | — | — | |||
| Methanol | 15-168 | 16 | — | — | |||
| Mineral oil | — | — | |||||
| Motor (Mineral) Oil, SAE | 15-54 | 25 | — | — | Not including E10 fuel with ethanol additives | ||
| 76-168 | 16 | ||||||
| Naphtha | — | — | |||||
| Naphthalene | — | — | |||||
| Nickel chloride 10÷30% | — | — | |||||
| Nickel sulfate | — | — | |||||
| Nitric acid ≤20% | — | — | |||||
| Paraffin | — | — | |||||
| Phosphoric acid | — | — | |||||
| Photo developer/fixing bath | — | — | |||||
| Potassium chloride | — | — | |||||
| Potassium hydroxide ≤ 50°C | — | — | |||||
| Potassium sulfate 10% | — | — | |||||
| Propane (liquefied) | — | — | |||||
| Propylene glycol (<90% by vol) | 15-108 | 25 | EPDM for ethylene & propylene bases | ||||
| 168 | 16 | ||||||
| Prussic acid | — | — | |||||
| Sea water | — | — | |||||
| Sodium bicarbonate | — | — | |||||
| Sodium chloride 5% | — | — | |||||
| Sodium nitrate ≤ 40% | — | — | |||||
| Sodium phosphate | — | — | |||||
| Sodium sulfate 10% | — | — | |||||
| Sulfuric acid 10% 60°C | — | — | |||||
| Sulfuric acid 100%, moist | — | — | |||||
| Sulfuric acid, smoking | — | — | |||||
| Sulphur dioxide (dry) | — | — | |||||
| Tannin | — | — | |||||
| Tanning agents for leather | — | — | |||||
| Tartaric Acid 10% 100°C | — | — | |||||
| Toluol 20°C | — | — | |||||
| Trichloroethylene | — | — | |||||
| Turpentine | — | — | |||||
| Water ≤ 100°C | — | — | |||||
| Water, deionised | — | — | |||||
| Water, distilled | — | — | |||||
| Zinc chloride | — | — | |||||
| Zinc sulfate 10% | — | — |
Guide only: Suitability can vary with concentration, temperature, pressure and operating conditions. Where an application-specific rating is provided, use those stated conditions rather than the general compatibility rating.
Press Fit Tools are available for hire exclusively to customers with an Anzor Credit Account.
Build faster and stronger decks with S2 Decking Screws.
To be the best, speed matters.
Build your deck with Anzor's Stainless Steel Decking Screws
AM Ruspert Concrete Screws: More Fixing Options with Multiple Embedment Depths
To receive useful info and product updates add your details below
Request a copy of our Engineering & Marine, or Construction Wall Chart.
Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.
Click here to download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.
